Sky Cutter .40 V2A with Red Covering
Pilots have been complaining about the grass being too high, so they send you out with your lawn mower to cut it down during the air show's lunch break. When the lawn mower operator bends down to tie his shoe laces, the mower takes off on it's own as he chases after it. The crowd goes wild. Nothing grabs the audiences attention like seeing a lawn mower soar through the sky. Not only is the Sky Cutter .40 V2 exciting to watch, it's also a pleasure to fly.
Flight Performance: Take offs are a breeze as the Sky Cutter takes to the air with ease. Simply apply power and pull up slightly on the controllers once speed has built up. High speed or slow, the Sky Cutter can fly at any speed and still retain a constant and steady flight path. Landings require a little finesse as the Sky Cutter will come in at a high alpha angle. With a combination of power and elevator, it will touch down softly.
Conclusions: The Sky Cutter is fun and easy to build. With top quality laser cut balsa, plastic and plywood; beautiful CNC cut foam cores and parts, it is the ultimate high tech kit! All in all you can't find a plane that gets you more attention, is as fun to fly, and rare as this one.
Included with Kit: CNC cut foam, laser cut balsa and lite-ply, full size plans, step by step photo illustrated manual, landing gear, screws, bolts, nuts, fittings, control horns, and nose gear. Optional Covering Set Not Included with this kit.
Required to Complete: 4 channel radio controller (with elevon or “V” tail mixing), engine (40-61 two stroke or .45-.72 four stroke), fuel tank, pushrods, wheels, prop, covering material, glues, and basic hobby tools.
Building: While the Sky Cutter may look a little bit different, the construction techniques used are the same as most other planes. The average modeler will have no problem. The instruction manual details the whole build process step by step. An average modeler should have no problem assembling the Sky Cutter.
|Dimensions||24 x 36 x 4 in|